How to Fix Windows 10 WiFi Problem (No Internet Access)

wifi-problem

Windows 10 is the great operating system. I upgrade windows 10 from windows 8.1 in my laptop. All works seem fine but I found a wifi connection problem. I reset wifi connection and password but the problem remains same. The problem shows “No Internet access” in the lower right taskbar.

Microsoft has described “The issue may occur if older VPN software is installed on Windows 8.1 and is present during the upgrade to Windows 10. Older software versions contain a Filter Driver (the Deterministic Network Enhancer) which is not properly upgraded, leading to the issue”.

Whatever the problems occur you can easily solve that problem. I describe some simple solution which solves your problem permanently.

The Solution will work for this problem:

  • Wi-Fi is not showing available networks.
  • Wi-Fi connected but shows “No Internet access”.
  • Wi-Fi shows the limited connection.
  • Wi-Fi driver does not solve the problem once updating or reinstall.

Preparation of solution

  • Check all your cable modem or internet service provider (ISP) that make sure there is no problem.
  • Update your network adapter driver.

Solution the Wi-Fi Problem on windows 10

Here I share some simple solution. It is a very simple way to fix your wifi network problem on windows 10.

Solution 01: IP Reset
  1. Right click on start menu and Open the Command Prompt (admin). Run as Administration dialog box appear then click YES.wifi-problem-01 wifi-problem-02 wifi-problem-03
  1. Now type the command netsh int ip reset and click enter and restart your PC.wifi-problem-04 wifi-problem-05

 

Solution 02: Renew IP Address
  1. Right click on start menu and Open the Command Prompt (admin). Run as Administration dialog box appear then click YES. The process is same as above discuss.
  2. Now type the command ipconfig /renew and hit enter and restart your PC.wifi-problem-06
Solution 03: Flush and Reset the DNS client resolver cache
  1. Right click on start menu and Open the Command Prompt (admin). Click yes once Run as Administration dialog box appears. Same as above discuss.
  2. Now type the command ipconfig/flushdns and hit enter and restart your PC.wifi-problem-07 wifi-problem-08
Solution 04: Turn Off all Firewalls

Firewall is safe for secure internet browsing. Sometimes firewall software can avoid you from receiving Wi-Fi connected. You can stop your firewalls temporarily for trying to visit a website you trust.

  1. To turn off firewall Right click on start menu and Open the Command Prompt (admin). Run as Administration dialog box appear then click YES.
  2. Now type the command netsh advfirewall set allprofiles state off and hit enter and restart your PC.wifi-problem-09 wifi-problem-10

To turn on your firewall software again then execute the following

  1. Right click on start menu and Open the Command Prompt (admin). Run as Administration dialog box appear then click YES.
  2. Now type the command netsh advfirewall set allprofiles state on and hit enter and restart your PC.wifi-problem-11 wifi-problem-012

 

Conclusion

That is all. I already face this problem which I mentioned above. I use solution 01 and solve that wifi connection problem. It is a very simple step to execute. If you face the same problem follow the Solution 01 and hope to get a good result. If not then follow othser solution which might help you.

Please feel free to ask me any questions if you have through comment. If you found this post useful, please share it Facebook, Twitter, or Google+.

Leave a Reply

Your email address will not be published. Required fields are marked *